Lian Li (PC-B10-B, PC-B10B) All Aluminum Mid Tower Computer PC Case- BLACK

Lian Li manufactured PC-B10 in Taiwan. The quality and craftsmanship are outstanding. With accolades and awards stretching back for the last two decades due to the unique combination of hand-crafted aspects with advanced machinery. The complete effort used to create every Lian Li chassis is clearly evident in the superior craftsmanship to be found in each one.
The hardware installation with PC-B10 is very easy and simple. The new internal layout has the motherboard on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, up to 280mm long , the larger graphics card can be used. The power supply unit was on the stand, which allwo to intake cold air from the button of the case. This will bring down the core temperatures and extend the lifespan of the PSU significantly.
PC-B10 has equipped with anti-vibration kit to reduce noise, also alot of parts has using thicker material to ensure there won't be vibration issue. To Ensure PC-B10 can provide the silent working envirorment.

Silent Performace:

Lian Li uses the best “Made in Taiwan” high quality aluminum panel for all Lian Li chassis. The solid main chassis was folded with 1.5mm thick aluminum sheeting to make a more sturdy structure which has less vibration. The front panels using a spring supported steel ball as door latch, this will keep the door shut in the right position. There also are rubber strip and noise reduction foam on the front door pane.
The new 5.25” bay tool-less mounting incorporates a mounting bar equipped with rubber padding. After closing the mounting bar, the rubber pad pushes and holds the 5.25” device in position to both secure and absorb vibration from the device.
Lian Li designers spent months to upgrade Lian Li’s HDD cage; the new HDD cage also has rubber suspension. The buckle hold the HDD in place, and then also absorb and reduce vibrations.
The aluminum PCI tool-less mounting module is equipped with a rubber pad which can hold the graphics card firmly while closing the gap found in the PCI bracket and PCI slot to reduce noise from escaping air and furthermore reduce vibrations.
The Power Supply has rubber pads for both insulation and support. The mounting clip is also aligned with rubber to reduce vibrations but also and also secure the PSU without scratching the painted surface.
There are noise reduction foam on the internal side of the 2mm thick side panel to reduce the noise level. There are also rubber strip around the edge of the side panel to seal the gap, reduce the vibration, and lower the noise level.

Creative Thermal Solutions:

The front 120mm intake fan brings cold air into the system. There are also vent holes on the 5.25” bezels to allow cold air to enter the chassis.
There is a 140mm intake fan on PC-B10, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack.
There is a 120mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis.

User Frinedly:

2009 has seen an all-new tool-less design from Lian Li aluminum chassis. To do this required a great many innovative patents to be filed worldwide. The ideas will make installing and maintenance much easier. For example when installing the 5.25” optical drive, just slide the drive into the 5.25” bay, and close the mounting bar to secure the optical drive, as simple as that. You may also use the mounting bar to mount a front panel bezel as well. ( Lian Li C-01, C-02).
Slide the hard disk within the cage into the special hard disk rack with the rubber suspension grommet.
To install PCI add-on cards require no tools at all. Simply open the aluminum arm of the tool-less PCI add-on card holder, insert the add-on card to the motherboard slots, and close the aluminum arm to hold the add-on card in position. The additional rubber padding on the aluminum arm assists in gripping the card bracket and securing it firmly.
To install PSU require no tools. Simply open the aluminum PSU holder, insert the PSU in position, also can turn PSU's fans up or down to suit your need, then close the aluminum PSU holder.
The installation of the hard disk is very easy, and tool-less. Place the hard disk into the aluminum cage, and close the clip to secure the hard disk. (2.5 HDD install feasible)
To release the solid side panel, simple just un-do the thrumb screw, and pull the latch. There is a hook for security lock.

Cable-Management Kit for cables to pass through, allow uesr convenient manage the cables.